Then I stain it and let it dry and apply the finish.. I've read a lot of places that you use mineral spirits on a rag to wipe down the wood to get the fine. There is no problem with using mineral spirits to wipe off the dust from .
Sand until the wood is smooth and even to the touch. Sand with, not against, the grain of the wood. Between sandings, use a tack cloth to remove dust. Clean the wood with mineral spirits, applied with a rag or a sponge.
Wood wetted with mineral spirits looks wet. When it looks dry again, you are good to go. Preparation – Rubbing Out Waterbased Finish on Cabriole Legs.
Carefully examine the surface. Look closely for any scratches left by coarse-grit sandpaper. Once the wood is blemish free, remove the dust. I use a shop vacuum with a soft brush attachment, followed by a wipe-down with a lint-free cloth moistened with mineral spirits.
Then sand the wood lightly with 220-grit paper before applying stain. An inexpensive turkey baster is a great tool for measuring small amounts of finish and mineral spirits. Mark the baster with a permanent marker. Just draw out equal amounts of sealer and solvent to make a 50 percent solution.
Review the basics of effective wood preparation, finishing & care. Home \ How-to. . Clean brushes soiled with oil-based finishes using mineral spirits. Soap and .
Where to Work; Top 5 Tips; Choosing a Repair Product; Sanding Tips; Use a Pre-
Mineral spirits, more commonly known as paint thinner, are clear liquid solvents used in painting and decorating. Sometimes called white spirit or Stoddard .