hidden hit counter

Preparing Bare Wood For Staining

Preparing Bare Wood For Staining

To remove those last bits of finish, palm sand with medium sandpaper (150 grit) until you see the bare wood. Then switch to fine sandpaper (200+ grit) until the entire piece is uniform. Wipe down the whole surface with a tack cloth to remove any dust from sanding.
Do NOT start sanding with very fine sandpaper on unfinished wood. Prepare the surface by using medium paper first, and then proceed to finer grades. On most raw woods, start sanding in the direction of the grain using a #120-150 grit paper before staining and work up to #220 grit paper.
Where to Work; Top 5 Tips; Choosing a Repair Product; Sanding Tips; Use a Pre-Stain Wood Conditioner; Where to Use a Sanding Sealer; Wood Preparation .
Whether you've just installed a wood floor or added some fresh trim to your windows or doorways, or even built a craft or furniture piece from scratch, you may .
Find out how to clean new wood surfaces for better penetration of stains and. Use BEHR PREMIUM® All-in-One Wood Cleaner to prepare the uncoated .

More from my site

Leave a Comment