hidden hit counter

Prepare Wood For Stain

Prepare Wood For Stain

To remove those last bits of finish, palm sand with medium sandpaper (150 grit) until you see the bare wood. Then switch to fine sandpaper (200+ grit) until the entire piece is uniform. Wipe down the whole surface with a tack cloth to remove any dust from sanding.
Do NOT start sanding with very fine sandpaper on unfinished wood. Prepare the surface by using medium paper first, and then proceed to finer grades. On most raw woods, start sanding in the direction of the grain using a #120-150 grit paper before staining and work up to #220 grit paper.
Start with a medium grade of sandpaper (e.g. #120) and gradually work your way to a finer grade (e.g. #220). Sand in the direction of the grain for a smooth, uniform finish and remove all sanding dust using a vacuum, dry paint brush or cloth. Look out for dried glue, especially in the joint area.
Learn about preparing wood for staining and how to stain unfinished wood.
Whether you've just installed a wood floor or added some fresh trim to your windows or doorways, or even built a craft or furniture piece from scratch, you may .
Problem woods. Some types of wood, like pine, cherry, birch and maple, are notoriously difficult to stain. A board that has a nice, attractive grain pattern can end .
We recommend finishing your wood with oil-based stain (see “Test the Stains”) and wood varnish. A clean work area is crucial for a smooth, blemish-free finish.

More from my site

Leave a Comment