To remove those last bits of finish, palm sand with medium sandpaper (150 grit) until you see the bare wood. Then switch to fine sandpaper (200+ grit) until the entire piece is uniform. Wipe down the whole surface with a tack cloth to remove any dust from sanding.
Learn about preparing wood for staining and how to stain unfinished wood.. Apply the wood cleaner per the manufacturer's instructions. â€¢ Rinse away the .
Do NOT start sanding with very fine sandpaper on unfinished wood. Prepare the surface by using medium paper first, and then proceed to finer grades. On most raw woods, start sanding in the direction of the grain using a #120-150 grit paper before staining and work up to #220 grit paper.
Clean unfinished wood with a damp rag before staining. Fill a spray bottle with 2 cups water. Add 2 tbsp. Mist a lint-free cleaning rag with the spray. Rub the damp cloth over the unfinished wood, rubbing with the direction of the wood grain to prevent splintering. Let the wood air dry fully before staining.
Wood finishing products may be applied with clean rags, brushes and other applicators. For best results when using a brush, make sure it is a high-quality one.
Then be sure to remove any excess with a clean, dry cloth. When using Water Based Pre-Stain Wood Conditioner, allow it to penetrate for 1-5 minutes, then .
Think of your wood siding, fencing, deck and outdoor furniture.. Use Cabot Problem Solver Wood Cleaner to remove mildew stains, dirt, soot or ash before you .